Our Products

Square lid

Code : 00250

Made in ABS. Knockout outlets. Height and level adjustable top. Compatible with any kind of Skimmer.

Code : 15862

Body and grille in white ABS. Fixed grille with screws.

Code : 01467

Code : 00257 (With Anti vortex option)

Ring support and grille in white ABS. Complete with grille fixing screws.

Code : 00280

2" female & male connection

Code : 00323

Return/ Suction. Adjustable flow. Made in white ABS, screw in S.S Max. Flow rate : 12 m cube/hr compilers with EN 13451 – 1 Standard

Code : 00303 (2" outer thread, inner Ø 50 mm to glue)

2" external thread, Ø 50mm. Made in white ABS. To be installed with conduit 00323

Code : 00295

2" male thread, Ø 50mm solvent internal Maximum Pressure: 6bar. Made in white ABS. Plug thread 1 ½". Recommended to be installed with wall conduit 00323

Code : 00301

Body and grille in ABS. Screws in S.S To be glued to Ø 63 mm pipe. Owing to its design this inlet is particularly suitable for overflow channels. Max. Advisable flow rate : 7 m cube/hr

Code : 00302

Supplied with niche for embedding in the pool wall. Manufactured in PS. PAR 56 300 W-12 V halogen lamp. The niche allows the option of a cable to pass through the side or the back with M-25 threads. The standard light is supplied without a transformer

Built of stable, heat-resistant plastic materials. White. Niche not required for installation. Fixed to the wall by means of a reinforced plastic cross. Plugs and screws. Supplied with 2.5 m cable of 2 × 1.5 mm square 100W – 12V halogen lamp. Supplied without transformer

Code : 21626

Manufactured in PA and ABS plastic materials. Supplied with niche for embedding in the pool wall and with 2.5m cable of 2 × 1.5 mm. Without screws, bayonet system on the trim and the housing. Easy to dismantle using the trim outer as a key to change the lamp. Aluminized 50 W – 12 V halogen lamp and 38 degree opening of 95 lux light beam at 4m distance with an illuminated circle of 2.5m. Possibility of attaching colour lenses to the trim outer. Light supplied without transformer.

Code : 33710

For connection from light niche to box, length 1 m.

Code : 28138(Threaded ends ¾ " & M25)

Manufactured in ABS, made up of three ¾ " inlets/outlets and M-25 screw thread

Code : 30825

Complies with EN 60742 Standard and IP-64 rating

Code : 00383 - 1381 AT (105VA 220V – 12V)

For light 21626, 21627 and 24765

Code : 00384 - 4146 AT (300VA 220V – 12V)

Code : 35604 AT (With 350 LEDs)

(Red, Green, Blue)

The filter tank is made of an inner fibreglass bladder to resist implosion and high pressure capability with a gel coat layer to avoid capability which is then continuously would with fiberglass stands to create a high strength vessel. All components are injection moulded from high strength Engineering Plastics with clamp lid

Code : 00541-0100 AT (9 m^3/hr Ø 500 mm conns, 1½ ")

Code : 00542-0100 AT (14 m^3/hr Ø 500 mm conns, 1½ ")

Code : 00543-0100 AT (21 m^3/hr Ø 500 mm conns, 2½ ")

Code : 00544-0100 AT (30 m/hr Ø 500 mm conns, 2½ ")

Robust design with new generation easy to handle lid-locking nut. Low noise levels due to rubber supports, Motor protection IP-55. Large capacity strainer basket.

Pump body and support in heat resistant plastic, S.S. Motor shaft of AISI-36 with double isulation and with IP 55 motor protection. 8 litre capacity strainer, will: transparent lid.

Code : 41448 (3.5 HP/ 3phase) Discharge @ 10m head 46 m3/ hr

Code : 41449 (4.5 HP/ 3phase) Discharge @ 10m head 64 m3/hr

Code : 41450 (5.5 HP/ 3phase) Discharge @ 10m head 75 m3/hr

Code : 41444 (100 m cube/hr @ 12 m head) 7.5 HP/3phase

Code : 41445 (123 m cube/hr @ 12 m head) 10 HP13phase

Note : 12.5HP & 151-IP can be supplied on order

Electronic dosing pump for wall mounting on a horizontal bracket. Manually regulated flow rate Regulation range; 0-100% and 0-20%. Acid resistant plastic housing

Code : 33839 (Manual 5 L/H - 7 bar)

Code : 01314-I (Capacity : 100 I)

Code : 01316-I (Capacity : 200 I)

Code : 01317-I (Capacity : 500 I)

Code : 01318-I (60 cm long stirrer)

Code : 01319-I (90 cm long stirrer)

Code : 08760 (18 kW Capacity)

Made in PP, stabilized against UV rays. United by modular fitting. According to EN-13451 -1(8 mm)

Code : 34194 (Height 35 mm, Width 195 mm)

Standard colour white

Note : Other colours available on request

Rails & steps in AISI-304

Code : 05497 AT (3 steps ladder)

Code : 05498 AT (4 steps ladder)

Suitable for 22, 24 and 33mm high grating. Made in plastic. Supplied in 2 m lengths. Inside measurement 24mm x 37mm

Code : 00224

For wishbone fixing

Code : 01355 (350 mm for 11/2" hose)

The perfect item for cleaning small particles or sand from the pool bottom. Manufactured in hard-wearing polyethylene (EVA), this model features a hose connection with a choice of two diameters (Ø 32-38). Weight is injected (without caps) which, together with its great flexibility, ensure perfect pool floor cleaning

Code : 36618 (With Wing-nut or wishbone fixing)

Code : 38423 (Aluminium telescopic 2.4 - 4.8m)

Blue plastic. Includes cuff.

Ø 38 mm (1 ½ ")

Code : 01374 AT (30m)

Code : 01375 AT (15m)

Code : 01377 AT (10m)

Manufactured in blue polypropylene. The Polyester net is welded to the skimmer frame, ensuring greater strength. Its long design maximizes collection along the float line.

Code : 36614 (With Wing-nut or wishbone fixing)

Ideal for cleaning the pool floor, due to its large size and special design

Code : 36615 (With Wing-nut or wishbone fixing)

Code : 01407 (With wishbone fixing)

Code : 01419 (Chlorine range : 0.5 - 6.0 mg/L ) pH range : 6.8 - 8.2

Code : 01426 (Phenol (pH) reagent 250 Tablets)

Code : 01424 (DPD 1 reagent 250 Tablets)

With elbow to connect to Ø 50mm pipe.

Code : 04042 (For concrete pools)

Code : 33586 (2" Screw in jet)

Code : 32641 (2 ½ " -Adjustable jet)

With elbow for joining a Ø 50 mm pipe.

Code : 04039

1" for hydro-massage control. Controls air to Venturi system

Code : 04045

For air distribution into the SPA by means of the blowers.

Code : 28460 (Air blower nozzle ,glue type)

To operate air blowers, jets and massage jets.

Code : 04048 (For max 7m single)

Converts pneumatic signal into electric ones.

Code : 04050 (For max 15m)

Code : 04028 (1.10 kW, Flow 133m cube/h a HA of 1m water head)